Mobile applications in the home door arrangement of doors and partitions can be divided into two kinds. Mobile sliding door off the biggest role is to create a more seamless atmosphere of the room, choose a border, the panel depending on the application of the occasion, which could be pulled. For example, can be installed between the kitchen and living room with a transparent glass partition, so taking into account the advantages of closed-end kitchen with an open kitchen, so that both housewives at any time to communicate with his family in the living room at the time of cooking, but also when fumes from cooking to avoid the living room into the other room. It is used as partition doors, the majority of the board more transparent, more open space like you can make. Of course, another decorative effect partition space, style can be selected based on personal preferences. The so-called doors, sliding means combined with the furniture. Board door simple alternative natural beech, cherry and other wood board, avant-garde metal plate surface calm, warm and elegant fabric board, but also a variety of styles to match.

 

First, select the movement of the door first thing to note its tightness

 

Mobile portal is easy to use, but the effect is usually poor seal between the door and the door, which is due to external, that is affixed to the bottom side of the door round bottom, two bottom sliding wheels most mobile part of the sliding door in order to avoid the end of round collided with another door, you must set aside a large space between the two resulting gap is too large, reducing the tightness. In this case, we may wish to select a larger loading capacity of the built-in bearing bottom round, bottom round this high technological content, able to cope with a variety of ground conditions. In addition, the quality of the brush seal is also very important, it is affixed to the back door. Good quality brush seal adhesive of viscosity, and no hair bleaching Shan, make close contact between the door and the door is closed, do not worry about dust invaded.

 

Second, observe whether the pulley and slide in close contact

 

In general, play a guiding role on the pulley. In the selection, in the direction perpendicular to the rock slide sliding door, the smaller the degree of shaking, indicating that the better the stability. When shaking, observe the pulley and the upper rail, if good quality sliding door, the gap between them is almost zero, so it will not slide shake the feeling, smooth and smooth. So closely integrated with the pulley slide slide determine its stability.

 

Third, the role of stopper means can not be ignored

 

In the case of uneven ground, sliding door closed, the door hit the wall there is a resilient, lateral displacement occurs, you can not stop smoothly, the stopper block will play a non-slip effect, so it is important to observe its material. Stopper block commonly used steel, but steel and good durability will be stronger, steel is not good, after a long period collision would produce a shift, the sliding door can not be stopped in place. In fact, the metal has a 'fatigue period', after a long period of 'work' is easily deformed, and the copper from the stopper block corrosion-resistant, can remain stable for a long time, so you can try to pick this material.

 

Fourth, choose carefully move the sliding door frame profiles

 

In the field of mobile stores, border materials can be divided into: carbon steel, aluminum-magnesium alloy, aluminum alloy and the like. Carbon steel products advantage is that the surface film rich colors, the disadvantage is easy to rust; aluminum-magnesium alloy surface is essentially magnesium aluminum decorative layer; and aluminum alloy is a high-strength aerospace materials. Titanium has a high strength, low specific gravity, high toughness, and other characteristics, therefore, the price would be more expensive. The market focus of debate mostly focused on product Which is the real aluminum alloy, in general, we can use in the selection of finger shells hit the border, aluminum alloy material sound more crisp, metallic feeling stronger. Due to the current movement of the door manufacturers are under the banner of 'aluminum alloy', consumers should remain cautious, in addition to the above method, it may be when purchasing businesses to produce test report inspection department.

 

Fifth, pay attention to other small accessories fit

 

In addition to moving door pulley, borders and other important materials need to be careful to pick some small parts can not be ignored. Anti-pumping device specially designed to avoid door bounce from the track in the past, this need to pick carefully observed; vibration damping device can be reduced in the sliding door in and ensure that the sliding door on uneven ground still smooth smooth ; height adjustment system can shorten the distance between the sliding door and the floor, but also to prevent dust from entering; wipers located mainly between the door and the door of the lap, to select a special brush dust barrier, good quality brush durable, but also to prevent long-term collision between the door and the wall and cause damage; if you selected mobile door plate surface is glass, be sure to check out the glass and the metal frame of the joint if there is rubber, it play a fixed role in ensuring that the glass will not crack due to vibration.

 

Sixth, the experience in the selection of carefully sliding effect

 

Sometimes, in addition to the selection of an article from a professional point of view to start, but also with a feeling. Carefully slide the experience brought about feelings. People often caught in a misunderstanding that the sliding door when the sliding light the better, in fact, this view is wrong, sliding doors in high quality slides should not be neither too light nor too heavy, but weight with a certain door, sliding no vibration, and smooth texture. Some mobile sliding door, although it is relatively light, but the feeling of floating out there, not smooth.

 

Seven, rely on sound slide to measure its quality.

 

Generally caused by slip on the noise factor for the process is poor and the gap between the pulley and the track bearing type pulley. Some though it was the end of round slides smoothly, but a closer look, you will find greasy feeling on the bottom wheel, this is because some sellers in order to achieve the purpose of mute slide at the end of the wheel greased. This not only exposed to dirt, grease, once dried, there will be obstruction, noise, and therefore must be observed in the selection of every detail, quietly experience during sliding.

 

Eight, the merits of the bottom wheel is the key to moving door selection

 

Whether long-term use of mobile door, the key is the quality of pulleys. Since the sliding door will usually do more than 2.4 m height, wide doors, plus now popular glass, metal door, so the board itself great weight, if the loading capacity of the end of round is not enough, it will affect the quality of an extremely mobile sliding door. In this case, only with large loading capacity of bottom round, in order to ensure its good sliding effect and long service life. High-end mobile sliding door is made of carbon fiber glass, with ball inside, quit with grease, poor choice of plastic or organic pulleys often made of plastic, small loading capacity, may start using not hurt, can a long time easily deformed, affecting sliding effect.